| Description: | Have you been recently looking for a solution that will keep all your transportable valuables dry and safe? If it is installing a Ute canopy can get you the desired result. These easy to install truck bed tops offer comprehensive coverage and storage solution while travelling long or short distances. Adding a canopy to your business truck will give a great protection to the cargoes from changing weather conditions or theft. Moreover, they also serve as a camper shell for any overnight trips. As Ute canopy Brisbane is usually designed with locks, installing and removing them isn’t difficult at all.
The installation procedure:
• Make use of some foam tape strips on the edges and front of the Ute canopy. Then measure the sides as well as the front of the canopy. Size the foam shape and lay its adhesive side along the bottom rails, so that the truck’s bed rails are not scratched by setting up the pickup bed top.
• Then lift the canopy to set it on the rails. However, it is suggested to take someone’s help when lifting the unit. Ensure to align the unit with the rails of the truck’s bed.
• As soon as you are done with this, immediately get inside the truck bed to fit it to the truck rails properly. Ensure to make use of the hook mounting clamps in order to adjust the Ute canopy Brisbane to the rails. Also, with your fingers open the bolts of the hook counter to make the clamp loose. Now place the hook clamp’s upper half to the canopy’s lip. Then wrap the mounting clamp’s other end to that of the pickup truck’s bed rail. Your next step would be to turn the bolt clockwise on the clamp, thereby securing the canopy to the truck. Again, place the hook mounting clamp to the canopy’s four corners.
The removing procedure
• Get under the Ute canopy of your business truck to loosen the bolts that were once fixed to hold the canopy. Make use of bolt removing equipment for this procedure. Well, these bolts will be generally attached to the four corners of the truck bed shield. However, if the unit is set up with clamps ensure to unclamp them. This way it is easier to uninstall.
• If any break lights have been set up on the canopy previously make sure to unplug them. And then pack the wires where they will not get tangled.
• Based on the weight of the Ute canopy Brisbane, ask people to help you lift down the hard-top. Ask the helpers to stand right at the four corners of the canopy. And then get inside the truck bed once more to push the canopy upward. Lift it high, so that all your helpers get good grip.
• Now, push the unit towards the back until the time it is completely took out. Then, instruct the helpers to take the unit down.
However, if you feel that this task is difficult for you, then you may think of taking a professional’s help.
Searching for Ute canopy http://www.matesratestools.com.au ? We offer quality Ute canopy Brisbane http://www.matesratestools.com.au at affordable price. |
